Signal converter mo.CAN for H-D
The mo.CAN OBD is a digital adapter for easy connection of our instruments directly to the diagnostic interface of a Harley-Davidson from 2004. Plug & Drive, it couldn't be easier. A tiny box eliminates the need to install sensors for speed or rpm.
Every Harley Davidson built in 2004* or later has this interface as a 3-pole connector on the vehicle. With the help of the digital adapter mo.CAN OBD, which is simply plugged into this connector, motogadget instruments can directly read out the speed, speed and MIL (motor warning lamp) from the vehicle data bus.
A power supply via the OBD interface is also possible. This makes it possible, for example, to operate a motoscope mini' without further connection work on the motorcycle. The instrument is simply connected to the mo.CAN OBD. All compatibility problems between instruments and original speed sensors, especially with H-D models from 2007, are solved. The signal for the MIL (Malfunction Indicator Light) is also read out for error messages on the motor and peripherals and can be displayed when an LED/warning lamp is connected. This allows a complete removal of the original instruments*. The mo.CAN OBD only consists of a tiny, fully encapsulated box, an OBD plug and a sufficiently long connection cable. It is resistant to vibrations and weather influences. Its function is guaranteed up to 5V on-board voltage and thus complies with all SAE specifications for motorcycles.
* with H-D Softtail from model year 2011, Dyna from model year 2012, XL from model year 2014, as well as all other models with HD-LAN the use is NOT possible. Only for bus system SAE J1850
*On certain models, e.g. V-ROD, removing the original tachometer can lead to problems with the ECU / immobilizer. Please ask your trusted dealer about this or test this before a conversion, e.g. by disconnecting the original speedometer. It may be necessary to deactivate the immobilizer.
Length/width/height of the box: 38 mm/19mm/13mm
Length of the cable from plug: approx. 1000 mm
Weight with plug and cable: approx. 36 g
Connector: Standard OBD interface (DEUTSCH Connectors)
- MIL (Engine Warning)
- Board voltage
directly from the diagnostic interface